Fireproof paste A (10 kg)

Technical documentation

Application: Metal tube with wool

Separate crossing

Mixed crossing

Application: Metal pipe, with combustible insulation
Application: Linear seams

TECHNICAL DATA:

  • Fire resistance class: up to EI 120
  • Colour: creamy
  • Environmental class: Z1,Z2
  • Density: 1.56 ± 5% g/cm³
  • Non volatile content, %: 79.0 ± 5%
  • Storage temperature range: from +5°C to +30°C
  • Shelf life, no limit to application: 10 months in oryginally sealed container
  • Theoretical paint amount (kg / m²) needed to obtain 1mm thick coating: 1,93 kg/m²
  • Commercial package: 10 kg
  • Oxygen index: ≥45 (i.e. completly non-flammable product)
  • Technical Approval: AT-15-7807/2016, ETA-15/0853 (expansion joints)
  • Cert. of conformity: ITB-2404/W
  • Hygienic Certyficate: HK/B/0557/01/2014
  • Declaration od Confirmity: CARBO/002-07-01-2016

APPLICATION:

The way of protecting flammable pipes with mineral wool cover.

  • Fireproof paste A 1
    Step 1: Put Multitube on the pipe under the insulation and slide it into the wall.Then put insulation on the pipe and a tape.
  • Fireproof paste A 2
    Step 2: Fill the remaining space with mineral wool. By using a putty knife, apply Flame Cabel Pasta A to form a ring with a width of min. 50 mm and thickness min. 0.6 mm.
  • Fireproof paste A 3
    Step 3: Apply Flame Cabel Pasta A to the pipe cover so that a ring forms with a width of min. 50 mm and thickness min. 0.6 mm.
  • Fireproof paste A 4
    Step 4: Mark the penetration with the attached label, mark Flame Cabel Pasta A and Multitube on it, enter the date and name.

PENETRATIONS

  • Clean the penetration opening, cables and pipes. Degrease, if required.
  • Install the mineral wool boards.
  • Protect the adjoing surfaces with a tape.
  • Mix the flame Cabel A Paste.
  • Apply several layers with a spatula.
  • Mark the penetration seal with the information imprint supplied together with each bucket of the Flam Cabel A Paste.

LINEAR JOINTS

  • Clean the joint.
  • Protect the adjoining surfaces with a tape.
  • Mix the Flame Cabel A Paste.
  • Insert mineral wool into the joint.
  • Apply the required amont of the paste with a spatula.
  • Mark the made penetration seal with the information imprint supplied together with each bucket of the Flame Cabel A Paste.

Related services categories