Fireproof glass door, light stainless steel frame (Single door)

Manufacturer: Promat
Rating:
96% of 1 votes 4,8/5 based on 1 reviews!

The doors PROMAGLAS®-SR- offer not only the effective and optimal fire protection but also maximum visibility and width of passage. The fine structure of the construction provides unlimited opportunities for architectural solutions.

Price on request

Order
*Product description is based on information provided by the manufacturer about the product. The description and photos are informative, operational changes are possible. In accordance with certain modifications from the manufacturer changes may be made in the description of the product or its parameters.

In general, if the doors are closed, they are not differed from the traditional glass doors without fire resistance capacity.

PROMAGLAS®-SR-T 30-1 glass door with steel corner or regular frame may be supplied; For delivery set, please, have a look below. The information on accessories and hardware of the doors and prices of the doors of different sizes can be provided on request.

These doors are designed to be installed into monolith or lightweight fire rated walls in accordance with DIN 4102, 4.part.

PROMAGLAS®-SR-T30-1, EI 30, 485.65

Price: 1000 mm x 2125 mm (Internal size: 901 mm x 2093 mm) - from 3000.00 EUR/pcs. without VAT (without door hardware)

Equipment SR-T30-1

Fully fabricated fire door set:

  • Framed leaves are manufactured from the stainless steel V2A, polished, porosity 240;
  • Promat®-SYSTEMGLAS 30, Type 1-0, installed into the framed leaves;
  • Glass joints are sealed with Promat®-SYSTEMGLAS-Silicone, black;
  • Sleeve dowel from V2A, polished, porosity 240;
  • Lock covered by V2A, polished, porosity 240;
  • Steel hinges, primed;
  • Bottom hinges are covered by V2A, polished, porosity 240, to be supplied separately;
  • Steel welded protective bolts;
  • Combined coating for hinges, closer and regulating mechanism of closer from V2A, polished, porosity 240;
  • PROMASEAL®-PL - Strips, black, stuck on sides and upper side;
  • Mortise latch with cylinder and V2A insert specifically used for prefabricated cylinders, deadlock;
  • U-shaped handle, synthetic, black, round;
  • Door closer DORMA ITS 96;
  • Combined coating for hinges, closer and regulating mechanism of closer from V2A, polished, porosity 240;
  • Bedplate profile 35 mm from V2A, polished, porosity 240, specifically prepared for tighten floor;

Frame:

  • Corner or standard frame (width of the holes ≤ 145 mm) are from fireproof galvanized sheet metal (d = 2 mm), primed;
  • Width 30 mm;
  • Depth of recess 46 mm;
  • Three-sided fire resistant sealing, to be supplied separately;
  • Grounding into the floor 30 mm;
  • Welded floor support (primed steel);
  • Welded console of the top hinge (primed steel);
  • Installation of the overhead closure on the rail;
  • Covering of the holes of bolts with waterproof solution;
  • Welded anchors of the frame (3 from each side);

Additionally:

  • Permit from the building supervision body, installation manual, labeling panel;

Official resolutions: SR-T30-1; The German institute of construction equipment (Berlin) GCP (general construction permit) Nr. Z-6.12-1729

RS-1: ABP (General confirmation of construction permit) Nr. P-3177/4212-MPA BS

PROMAGLAS®-SR-T30-1:

  • Dimension of the module (BRM), maximum width and height: 1000 mm x 2125 mm; 1000 mm x 2250 mm; 1125 mm x 2125 mm; 1125 mm x 2250 mm; 1250 mm x 2125 mm; 1250 mm x 2250 mm;
  • Size of the free passage (LDM), maximum width and height (openings approximately 120°): 901 mm x 2093 mm; 901 mm x 2218 mm; 1026 mm x 2093 mm; 1026 mm x 2218 mm; 1151 mm x 2093 mm; 1151 mm x 2218 mm;
  • Door with corner frame, goods numbers: 496 110; 496 120; 496 130; 496 140; 496 150; 496 160;
  • Door with standard frame (width of the holes ≤ 145 mm), goods numbers: 496 115; 496 125; 496 135; 496 145; 496 155; 496 165;

(*) Equipment is similar to T 30-1, in addition the connecting security glass d =16 mm without fire safety requirements for framed leaves is installed, floor sealing.

SR-T30-1 Ancillary equipment

Labeling - goods numbers:

  • Bedplate profile 17 mm, without floor sealing - 496 200;
  • Grounded floor sealing - 496 205;
  • Railed closer with electronic locking and separate smoke alarm (V2A coating) - 496 210;
  • Door bottom closer DORMA BTS 80 F (frame welded insertion), separate coating of the upper leaf - 496 220;
  • Door bottom closer with one-side passage function DORMA BTS 80 FLB (smoke alarm is required), separate coating of the upper leaf - 496 225;
  • Door bottom closer with hydraulic locking function DORMA BTS 80 EMB (smoke alarm is required), separate coating of the upper leaf - 496 230;
  • Smoke alarm, silver color - 496 235;
  • Lock in the active leaf with anti-panic function - 496 240;
  • Handles from stainless steel - 496 250;
  • Double frame F 90 for lightweight walls- 496 255;
  • Frame from stainless steel (depended on sizes) - 496 260;
  • Promat®-SYSTEMGLAS with one-side protection from the ultraviolet rays - 496 500;
  • Door handing 180° -;
  • Frame options without threshold, without grounding into the floor -;

(*) Equipment is similar to T 30-2, in addition connecting security glass d =16 mm without fire safety requirements for framed leaves is installed.

Nonstandard models, customer tailored dimensions, other individual orders, electronic parts, and individual frames can be ordered on request. The doors without fire protection or without smoke protection are available on request.

Package:

The cost of the additional package will be indicated in the bill, if the additional package is to be required for the safe transportation or for the protection of the goods.

Related services categories

Comments RSS feed Comments

Add New Comment

In your cart

Your shopping cart is empty