Light panel "Emergency exit" YD-650AC/DC

Rating:
85% of 1 votes 4,3/5 based on 1 reviews!

The luminary must be always connected to the AC electrical power of a building. If the power goes out and in the event of an outage, the lamps switch on automatically. When the power supply is restored, the luminary will be switch off and the battery will begin charging.

*Product description is based on information provided by the manufacturer about the product. The description and photos are informative, operational changes are possible. In accordance with certain modifications from the manufacturer changes may be made in the description of the product or its parameters.
  • Source of energy: 2.4V 4.5Ah battery
  • Voltage: AC 220V ± 10%
  • Frequency: 50Hz
  • Operating temperature range: -10oC- ~40oC
  • Lamp: T5 8W/WW
  • Run time: ~3 hours
  • Battery recharge time: ~20 hours
  • Dimension (HeightxWidthxDepth mm): 340x100x70
  • Weight: kg 0,5

Used for: This emergency lighting is suitable in the premises where the need for low powered exit and emergency light is established. Such light is installed in the premises.

Operation instruction: Before the emergency light will be initiated, it must be charged (~ 20 hours before its full). To extend the battery’s life time it must be recharged each time after the luminary has been used. Even if the lights have not been in use for a long time period, it is recommended to recharge the battery every 3 month.

There is a mounting panel under the luminary. The panel is used for connection to the AC power system. After the luminary will be connected to the electrical power, the luminary should be fixed back to the panel. After connecting to AC power system the red light-emitting diode on front panel lights and it means that the battery begins charging.

Related services categories

Comments RSS feed Comments

Add New Comment

In your cart

Your shopping cart is empty