Palopumppu PH-DELTA

Detailed description Fire fighting pump PH-DELTA

Due to its low weight and compact design the PH-DELTA fire fighting pump can be very easily transferred by only two firefighters to the vicinity of fire, even in narrow and uneven areas.

Benefits of the PH-DELTA petrol-engine driven pump:

  • Professional, two-cylinder, air-cooled, four-stroke OHV petrol engine with automatic mechanical speed control, powerful pump chamber
  • Fixed mounted motor-pump assembly in one construction unit
  • Anti-vibration mounting of the unit
  • Robust, ergonomically designed tubular frame
  • Manual start (recoil starter)
  • Conventional fuel
  • Allows long-term full load
  • Speed control
  • Gas vacuum pump
  • Pressure gauge at the outlet from the chamber
  • Ball valve at discharge
  • Ceramic mechanical seal
  • Service support
  • Bronze impeller

Warning: The pump must not be run in enclosed areas as there is a danger of carbon oxide poisoning!!!

Device description and configuration:

Basic configuration:

  • Engine: Briggs & Stratton Vanguard 18HP
  • Pump casing: high-strength aluminium alloy (hydronal)
  • Pump cover: high-strength aluminium alloy (hydronal)
  • Impeller: bronze
  • Frame: welded steel

The pump is fixed to the motor to form one unit. Therefore, it cannot be used separately. The motor shaft passes through the pump casing equipped with a seal. The pump housing has a cover with a suction port and discharge port with a ball valve.

Never operate the pump without water as this may cause overheating leading to damage to the pump.

Roll bar frame is welded from steel tubes coated with paint finish. The device is provided with hinged handles for handling of the pump. The Vanguard 18HP engine is manufactured in the highest quality of Briggs & Stratton engines.

The data was measured by the accredited testing laboratory TÚPO No. 1011-2

Specifications:

  • Max. flow: 1 703 l/min
  • Flow at 0,5 MPa: 774 l/min
  • Flow at 0,6 MPa: 577 l/min
  • Total head: 76,5 m
  • Max. suction depth: 8 m
  • Suction connection: Storz B75 (2,5")
  • Discharge connection: Storz B75 (2,5")
  • Engine: Briggs & Stratton
  • Engine power: 13,4 kW / 18 HP
  • Integrated fuel tank capacity: 8 l
  • Fuel: Unleaded petrol (BA95)
  • Device dimensions: (L x W x H) 600 x 570 x 595 mm
  • Dry weight (empty): 62,2 kg
  • Weight (with full tanks): 70 kg

Aiheeseen liittyvät palveluiden kategoriat

Comments RSS feed Comments

Add New Comment

Ostoskorissasi

Ostoskorisi on tyhjä