Avbrutt brannspjeld mcr FID PRO (BFL 24 - T, 100 mm, [N] / [M])

Produsent: Mercor
Modell: mcr FID PRO (BFL 24 - T)
Vurdering:
0% of 0 votes 0/5 basert på 0 anmeldelser!

Single-blade cut-off fire damper and damper for fire ventilation systems.

Teknisk informasjon

Pris ved forespørsel

Rekkefølge
* Produktbeskrivelsen er basert på informasjon fra produsenten om produktet. Beskrivelsen og bildene er informative, operasjonelle endringer er mulige. I henhold til visse endringer fra produsenten kan endringer gjøres i beskrivelsen av produktet eller dets parametere.

Brannmotstand: EIS 120, EIS 120 AA – depending on method of manufacturing, as well as method og place of installation.

Types of dampers:

  • mcr FID PRO / M – round dampers in the form of a sleeve
  • mcr FID PRO / N – round dampers in the form of a nipple
  • mcr FID PRO / K – round dampers in the form of a flange

Purpose: cut-off Branndempers of the mcr FID PRO type with the thermal release unit are designed to be used in general ventilation systems where these systems run through building partitions (mcr FID PRO/S designation). In the event of fire, these dampers enable the partition, through which ventilation og air-conditioning ducts run, to retain its fire resistance properties. In normal operating conditions the damper’s screen is open. If fire breaks out, the damper’s screen closes. 

Control – release:

KW1 mechanism – activated by a return spring with fusible link rated at e.g. 72°C or remotely by an electromagnet (pulse or power break), reset by means of a lever or additional actuator (Vn= 24V DC or 230V AC).

RST mechanism – activated by a return spring with fusible link rated at e.g. 72°C, manual re-arming by means of a lever.

Electrical actuator – activated by a thermocouple rated at e.g. 72°C or remotely, by supply power decay (power break), remote reset by supplying power (Vn= 24V AC/DC or 230V AC).

Electrical actuator – activated remotely, by supplying power (pulse), remote reset by resupply of power (Vn= 24V AC/DC or 230V AC).

Dimensions (to the accuracy of 1 mm): The mcr FID PRO dampers are manufactured only as round dampers 100 mm to 315 mm in diameter. Apart fra standard dimensions, dampers can be customised to any Størrelse within the specified ranges.

Relaterte tjenester kategorier

Comments RSS feed Comments

Add New Comment

I handlekurven

Handlevognen din er tom